EBC Brakes – MTB Organic Pads for HAYES MX2 and MX3 and SOLE

EBC Brakes - MTB Organic Pads for HAYES MX2 and MX3 and SOLE Rating:
List Price: $18.00
Sale Price: $18.00
(as of 01/14/2015 17:48 UTC - Details)

Availability: Usually ships in 24 hours
Eligible For Free Shipping

EBC Brakes – MTB Organic Pads for MAGURA MT SERIES 2/4/6/8 2012

EBC Brakes - MTB Organic Pads for MAGURA MT SERIES 2/4/6/8 2012 Rating:
List Price: $18.00
Sale Price: $13.14
(as of 01/18/2015 18:57 UTC - Details)

Availability: Usually ships in 24 hours
Eligible For Free Shipping

Disk Brakes For Mountain Bikes

A mountain bike is considered as being a bicycle that is designed specifically for mountain biking, either on dirt trails or on other unpaved environments. Mountain bikes are different from regular bikes in a number of ways. For one they have wide and knobby tires for extra traction and shock absorption.

As well, most mountain bikes are fitted with bar ends on the handlebars, however with the increase in the popularity of riser handlebars, fewer riders now tend to use bar end extensions.

There are basically four different classifications of mountain bikes, which are: fully rigid, which is when the frame has a rigid fork and fixed rear with no suspension; hard tail, which is a frame with no rear suspension, and these bikes are usually used with front suspension; soft tail, which is a frame with a small amount of rear suspension, but activated by the flex of the frame instead of by the pivots; dual or full suspension, which is a front suspension fork and rear suspension with a rear shock and linkage that makes the rear wheel move on pivots.
There are many key components on the typical mountain bike, with one of the most critical of all being the mountain bike disk brakes. Mountain bike disk brakes are featured on most new mountain bike models, and they offer much improved stopping power over the previously used rim brakes.

Mountain bike disk brakes also work much better under adverse conditions, because they are located at the center of the wheel, unlike rim brakes, and therefore they remain drier and cleaner than other rims. Although there are many advantages to mountain bike disk brakes, there are some disadvantages as well, such as the fact that they weigh more and are often more expensive as well.Maintenance on these particular brakes also tends to be more difficult and costly, and this is particularly so with hydraulic disk brakes, which work by moving brake fluid through a hose or line to squeeze the pads together.

You always need to make sure that your brakes are in as proper working condition as possible, and so this means that you need to take your bike itself in to get a full inspection monthly, if not more. This will not only ensure that your brakes and the rest of the parts on your bike last as long as they possibly can, but more importantly that you can feel safe riding on a bike that you know is safe and secure and which will be able to properly handle those rugged and steep hills.

Bicycle Maintenance

Learning to ride a bike is no big deal. If you fall off, just brush yourself off and climb back on. Learning how to keep your bike from falling apart can be just as easy.

Bicycle maintenance is vital to the performance and preservation of your ride. Without proper maintenance, your bike will quickly go from a lean, mean, two-wheeled machine, to a squeaky, rusty, pant leg munching mess. Keeping your bicycle in top condition requires regular protective and preventive maintenance, some of which can be done by you. Other jobs may require the skills of a professional cycle repairer.

Tires

When riding a bicycle, most of the load and pressure falls directly on the tires. Check your air pressure to be sure the tires are inflated as per the manufacturer’s specifications. Tires should be inspected on a regular basis for any signs of ripping, or wear and tear. Wheels need regular tuning and adjustment, and should be checked for dents and twists caused by collisions or falls. Spinning is the best way to check a wheel. If the wheel shakes from side to side as it spins, it will need to be tightened. Spokes also need to be tightened and fixed firmly to the rims as part of regular bicycle maintenance. The spokes transmit pressure, so if they’re damaged they must be replaced immediately.

Handlebar

Similar to the steering wheel of a car, the handlebar is a key component in maneuvering the bicycle. A handlebar needs to be adjusted to produce the best results. Adjust the height so that you can comfortably hold the handlebar when seated. The handlebar should be properly aligned with the front wheel, to accommodate both quick swerves and smooth changes in either direction. A properly adjusted front fork is equally important. The front fork stabilizes the handlebar and should be securely fastened to the handlebar post. Also, be sure that your bicycle maintenance regime includes checking that the pedals are tightly secured.

Brakes

The single most important part of the bicycle for rider safety is the brake assembly. Check the brakes by squeezing them and rolling the bike ahead. If the brakes work properly, the wheels will not roll and the brake pads will stay squarely on the rims without touching the tires. If the brake levers touch the handlebars when pressed, it means the brake cables are loose. Tighten them and check for wear. If the brake cables are frayed, have them replaced.

Chain

Proper bicycle maintenance includes regular lubrication of the chain, to produce smooth and swift movement. Use a de-greaser to remove accumulated dirt on the grease. Remember to put fresh grease on to replace the dirty grease that has been removed. Keeping your chain clean and well lubricated will keep it from getting stuck or jumping the gear teeth.

Keeping your bicycle in prime riding condition doesn’t take a lot of tools or a great deal of technical knowledge. Bicycle maintenance is a simple task that takes only a little time and effort. Keep your bike fit and it will last many years keeping you fit.

The owner of this website, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.